How To Install Kickstand Spring

Tips for Installing a Motorcycle Kickstand Bound

I recently wrote a post virtually how to size a replacement motorbike kickstand spring, so now it is time to discuss some tips and tricks for actually installing a motorcycle kickstand spring.

Writing this detail postal service was on my to-do list for a while, only it was actually my Twitter friend Mark Griffin (@MarkGriffin59) who reminded me to cease slacking off and to get around to writing it.

Anyways, we are going to talk over the coin or washer play a trick on for installing a motorcycle kickstand spring.

Now, the "trouble" with motorbike kickstands springs is that they are kind of beefy – they need to be in club to support the weight of the kickstand itself and to hold the kickstand tight against the body of the frame when riding down the road.  Stretching a motorcycle kickstand spring by hand or with a pair of needle nose pliers is difficult to nearly impossible.  Trust me, I know because I installed my kickstand jump Wednesday night, and my hand is still sore today (Friday morning).

One really good trick for getting the job washed apace and relatively hands is to get yourself a pile of small coins or washers.  Loop one end of the kickstand spring around something and bend the spring to the left.  As a gap appears on the opposite side (right), slide a coin firmly into the space.  Once washed, curve the spring in the opposite straight (to the right) and install a money on the left.

Repeat every bit many times every bit you can, bending the spring i fashion so the other.  Essentially, when done, you volition have the bound manually extended with a bunch of coins sticking out of either side.

Install the spring on your bike, finding the position of the kickstand such that the two holes for the kickstand jump are closest together.  On old Harley's like mine, at that place is a safety tab that you remove and you turn the kickstand until it is pointed toward the front wheel.  This brings the agree on the frame and on the kickstand arm itself closest together.

You may need to stretch the leap a little more than depending on how well yous did inserting coins, but this will certainly be better than stretching information technology the entire length required for installation.

One time the spring is in identify, offset pulling the coins out with needle nose pliers.Besides, you need to wear safety goggles during this Entire process (coin insertion and removal).  The force of the coin popping out from between the rungs of the leap can ship information technology flying and nobody wants to accept a penny to the eyeball.

If you lot enjoyed this web log post about installing a motorcycle kickstand bound, delight like or share on Facebook, tweet on Twitter, or like on Instagram.

Didn't discover what you needed in this item postal service?  Check out the HappyWrench Motorcycle Repair Link Database.  It is a one-stop shop for all your DIY motorcycle repair information needs.

Too, forgive any typos or grammatical errors a I wrote this web log mail from my telephone.

Virtually The Writer

Christopher was born in a small-boondocks NY and, over the years, owned a couple dozen different motorcycles, ranging from cruiser to enduro, Japanese to American. He started HappyWrench in 2022 every bit he wanted to share his passion for motorcycles with other people.

Source: https://happywrench.com/installing-a-motorcycle-kickstand-spring/

Posted by: lawsonsplays.blogspot.com

Share this post